SPECIFICATIONS
Roof components:
1. Cpac concrete roof tiles
2. Cast in-place concrete ridge capping stainless steel no.27 valleys
3 Stay cool Cpac for thermal roof insulation
4. steel roof construction
5. Termite treated timber fascia boards & soffit linings
6. Fiberglass extruded gutters & down pipes
7. Dutch gables (black glassed in)
8. 9 mm. Gypsum plaster board feature ceiling with concealed down lighting
9. Birds protection

Main building structure:
1. Block walls 70 mm. cavity to external single block to intermediate internal walls and 200 mm. wide to load bearing walls
2. Solid mass concrete (25 mpa) ground floor and upper top beams
3. Internal walls 10 mm. cement plaster coated with 3 mm. skim finish coat over
4. External walls 10 mm. cement plaster finish coat and three painted finish coat over
5. 150 mm. reinforced concrete ground floor over 100 mm. compacted base course ground poison and termite control treated
6. 200 mm. solid mass (25 mpa) concrete basement walls and floor
7. Mass compacted solid back filling to all footing and foundations
8. Solid concrete pre-cast feature panels to all external window & door openings

Architectural finishes:
1. Heavy duty aluminum external window & door frames, 6 mm black plate glass in-fills, to sliders and awning (top hung) windows
2. Solid teak panel internal doors with satin polished hardware
3. Remote controlled steel tilt-a-door (imported) to garage
4. Teak wood for internal door

External structures:
1. Solid mass (25 mpa) concrete swimming pool (cast-in-situ) selected ceramic wall & floor tiles pebble coated (pool perimeter) skirting
2. Solid 200 mm. wide block garage wall 150 mm. solid (25 mpa) concrete floor & roof structure
3. Concrete block external perimeter walls cement rendered and pebble coat finished to 2.5 meters high

Tiles:
1. Living area, bedroom and basements imported ceramic tiles 60x60 cm. cut with marble decorative diamonds (varying in colour in each house)